Why do white particles appear on my leather ?Either salt has risen back to the surface (this salt could be from residuals in the tanning process, from sweat, or from the exterior)
or, you have used URAD too much or too often. (See question «How much is very little?» ?)
Or finally, you've used Urad on a too porous leather.
How to deal with mold and mildew problems ?We received many testimonies about how people were impressed how easy URAD removed mold and mildew from the leather and also how it helped to keep the mold and mildew from reoccurring! (Specific items in letters: winter boots, saddles, tack and leather furniture
Note that AQUILA has received even more of these reviews so we would probably recommand AQUILA first.
How to remove the salty white film?This salt can come from tanning process, from perspiration or from the salt they put on the streets...
Put a wet cloth over the salt stain area for a few hours. Apply Urad while still wet and let Urad work. When dry, Urad will have worked the salt up and out of your leather to the surface. Gently rub it off with a soft dry cloth. If needed, use Aquila to remove any salt remaining. Apply Urad again.
Video presentation of Urad productsThis is a 4 min presentation of some Urad products. It includes short demonstrations and applications.
We are in the process of making a complete set of instructions clips for each product...They will be posted here as they are produced.(12-2004)
Modem connection - click here for low resolution clip
High speed connection - click here for high resolution clip
How to remove the white film due to wax build up?Gently rub it off with a soft cloth, humid with warm water. If it does not come off completely with just warm water, use Aquila or add a few drops of white vinegar to the water.
| 
